There are two primary varieties of fan, axial fans and centrifugal fans. Pelonis Technologies, Inc. (PTI), a global leader in fan technology for more than 25 years, manufactures both axial and centrifugal fans. The design and function of a centrifugal fan is very different from those of an axial fan. Their differences make them each suited for different applications and customers are sometimes unclear as to which fan type will best suit their needs.

Axial Fans

Axial Flow Fans date back to the horizontally configured windmills of Europe in the Middle Ages. The first electrically powered fans, introduced in the 1880s, were axial fans. Axial fans are named for the direction of the airflow they create. Blades rotating around an axis draw air in parallel to that axis and force air out in the same direction. Axial fans create airflow with a high flow rate, meaning they create a large volume of airflow. However, the airflows they create are of low pressure. They require a low power input for operation.

Centrifugal Fans

The centrifugal fan was invented in 1832 by military engineer Lieutenant General Alexander Sablukov of the Russian Empire's Imperial Russian Army. Often called blowers, centrifugal fans vary differently from axial fans. The pressure of an incoming airstream is increased by a fan wheel, a series of blades mounted on a circular hub. Centrifugal fans move air radially - the direction of the outward flowing air is changed, usually by 90°, from the direction of the incoming air.

The airflow created by centrifugal fans is directed through a system of ducts or tubes. This helps create a higher pressure airflow than axial fans. Despite a lower flow rate, centrifugal fans create a steadier flow of air than axial fans. Centrifugal fans also require a higher power input.

Application of Axial Fan

Because of the low-pressure high-volume airflows they create, axial fans are best suited for general purpose applications like Marine Fans. For example, they excel at moving air from one place to another, cooling confined spaces such as computers, and cooling larger spaces such as work spaces.