MCB is the abbreviation of Miniature Circuit Breaker, and some people call it Micro Circuit Breaker or small Circuit Breaker. Due to various reasons, such as incorrect connection or over-current conditions, a short circuit or overload may occur in the circuit. MCB is similar to a fuse. The only difference is that the fuse needs to be replaced after it is blown, while the miniature circuit breaker can be easily reset by clicking or pressing a button when overloaded.

What is AC MCB?

Alternating current, also known as 60hz or 60 cycles per second, is what drives the power grid. The voltage alternates between +V and -V, changing 60 times per second. A voltage of 0 volts occurs 60 times per second at a certain point. The AC miniature circuit breaker will disconnect at this 0v point, extinguish the arc, and protect the circuit from excessive current.

There are many types of AC miniature circuit breakers on the market. However, the correct MCB should be selected according to the place of use.

Because AC currents alternate and their values are zero during each cycle, arc interruption is relatively simple. In every country, the number of alternating current cycles per second has been standardized, and in most cases, it is 60 Hz or 50 Hz. The grid usually provides alternating current, while specialized industrial or battery applications often use direct current.

Molded Case Circuit Breakers - MCCBs

What are MCCBs? Molded Case Circuit Breaker, MCCB, is an electrical protection device to protect electrical circuits from damage by overcurrent. Prevents overload, short circuits, and switching of circuits. About ComPact Molded Case Circuit Breakers, MCCB. Protect cables sized for 100A to 3200 A. They now come in various sizes, intelligent metering and monitoring, and with integrated earth leakage protection. Their highest breaking capacities allow them to protect also smaller cables when connected close to a powerful energy source. As one pillar of digitally connected power distributions (EcoStruxure Power), ComPact breakers take part in energy consumption and asset management optimization. Benefit from 65 years of technological leadership, and rely on proven quality, opted for even in most demanding environments. How do MCCBs work? MCCB uses a temperature-sensitive device, also known as a temperature element, with a current-sensitive electromagnetic device, also known as a magnetic element, to provide the trip mechanism for protection and isolation purposes. With this, it can ensure overload protection, prevent short circuits,s and act as an electrical disconnector switch.

AC Surge Protective Device SPD Surge Protection Device

Surge Protective Devices are designed to protect against transient surge conditions. Large single surge events, such as lightning, can reach hundreds of thousands of volts and can cause immediate or intermittent equipment failure. However, lightning and utility power anomalies only account for 20% of transient surges. The remaining 80% of surge activity is produced internally. Although these surges may be smaller in magnitude, they occur more frequently and with continuous exposure can degrade sensitive electronic equipment within the facility.

LSP has a comprehensive line of AC SPD to meet your needs, regardless of the exposure risk. They help reduce costly downtime and protect sensitive electronic equipment against the damaging effects of transients caused by lightning surge current, utility switching, internal load switching, and more. Each unit is independently tested and backed by the largest engineering and technical support in the industry.